Sofarsolar SOFAR 3KTLM-G3 - Connecting the DC Cables

ELECTRICAL CONNECTIONS
38 SOFAR 3 ... 6KTLM-G3
3. Install the crimped ring terminal and the washer with the M6
screw and tighten these with a torque of 6 Nm using an Allen
key:
①
M6 screw
②
Ring terminal
③
Threaded hole
5.5 Connecting the DC cables
Please observe the recommended cable dimensions:
Cable cross-section (mm
2
)
Outer diameter
of cable (mm)
Range
Recommended value
4.0 … 6.0
4.0
4.5 … 7.8
1. Remove the crimp contacts from the positive and negative
connections.