Sofirn SP10 Pro - Specifications; Battery Specifications

Specifications
 Emitter: 1x 90 CRI Samsung LH351D LED with a lifespan of up to 50,000 hours
 Battery options: 1x 14500 Li-Ion battery, 1x AA alkaline battery, 1x AA NiMH battery
 Operating voltage: 3.0V - 4.2V (14500 battery) / 1.0V - 1.60V (AA alkaline or NiMH battery)
 Dimension: 88 mm (length) × 20.5mm (head diameter)
 Weight: 40 ± 1 grams (without battery)
 Anduril 2 User Interface
 flashlight body: Aerospace grade 6061 grade aluminum alloy, CNC manufactured to
hard-anodized to military grade specification type III, anti-abrasive finish to get solid built body,
anti-crash geometry and better heat exchange.
 Toughened mineral glass lens - scratch and wear resistant
 Orange peel textured reflector
 Automatic Stepdown: Turbo mode steps down to High mode automatically to prevent
overheating.
 Electronic reverse polarity protection from improper battery installation
 Low voltage protection: The flashlight steps down automatically when the voltage is lower than
3.0V. It also turns off automatically if the voltage gets lower than 2.7V. Please recharge the
battery.
 Advanced Temperature Regulation (ATR) technology: As the temperature rises, SP10 Pro is
programmed to automatically step down and step up the brightness to prevent overheating.
、
Battery Specifications
Battery Type
Dimension &
Quantity
Compatibility
Rechargeable lithium-ion
battery
14500 x 1
Yes
Rechargeable NiMH battery
AA x 1
Yes
Disposable alkaline battery
AA x 1
Yes
Battery Installation: Unscrew the
tailcap to insert one 14500 battery or
one AA Alkaline battery or one AA NiMH
battery with the
anode side (+) towards the head, then
screw the tailcap back on. Button top
14500/ AA batteries are supported.