MIVI Technical Manual
REF: 379/4 10
1.4.6
Other certifications
Japanese Ex approval is available at Sofraser distributor in Japan.
Korean Ex approval is available at Sofraser distributor in South Korea.
MIVI sensor with “standard” design, relevant flow through cell/measuring chamber/pot,
mounting flange to be welded and cap are registered under CRN n° 0F16467.2 by Absa, for the Al-
berta province (MAWP 6895kpa, design temperature 300°C, MDMT -200°C).
MIVI sensor with “sanitary” design is still manufactured according to the original file and 3A
certificate N° 1013 dated March 30
th
, 1999. Compared to “standard” design, the gaps and threads
were soil can accumulate and become source of contamination are eliminated, improving the effi-
ciency of the CIP (Cleaning in Place). In food and beverage, pharmaceutics, biotech, cosmetics…
MIVI with “sanitary” design is best combined with electropolish finishing that reduces the rough-
ness of the wetted parts surface, and installed on its mounting accessory without its flow damper.
To Next Page