Soho SO-255WUI - AP MODE PAIRING; AP Mode Instructions

18
B. HOW TO PAIR USING USING ‘AP MODE’
Check that ‘AP MODE’ is selected on the top right of the screen�
i. Check that the Soho SO-255WUI Air Purier is plugged in and
powered at the socket�
ii. Conrm the SO-255WUI Air Purier is in standby mode, i�e� all
functions are o�
iii. You need to reset the purier into AP pairing mode by FIRST
tapping on and holding ‘SPEED/WIFI’ on your purier control
panel for 5 seconds until you hear a beep sound and the
indicator start blinking rapidly� Continue tapping and holding on
‘SPEED/WIFI’ on the control panel for another 5 seconds until you
hear a SECOND beep and the
indicator starts blinking slowly�
NOTE: DO NOT REMOVE YOUR FINGER FROM THE CONTROL PANEL BETWEEN THE
TWO BEEPS.
iv. Click ‘NEXT’ to step through all instructions as prompted�
v. Choose ‘CONFIRM THE INDICATOR IS BLINKING RAPIDLY’
and click ‘NEXT’�