The EV Charger Cable connects the EV plug to the inverter
The wall mounted EV Charger cable holder is used for hanging the EV Charger cable
and plug, protecting the plug from rain when not plugged into the vehicle (V2
holders), and provides strain relief for the inverter when the cable is pulled.
Figure 2: The EV Charger Cables (with holders)
Monitoring Platform
The monitoring platform enables monitoring the technical and financial performance of
one or more SolarEdge sites. It provides past and present information on the system
performance both at the system and module levels.
Supported ACGrids
The following figures illustrate grids that are supported by SolarEdge single phase
inverters. Refer to
Setting Country and Language
on page 44 ).
15
EV Charging Single Phase Inverter Guide MAN-01-00588-1.1
To Next Page
Loading...
Need help?
General