SolarEdge SE9KUS - Page 33

Indication
ON/ OFF/
P
switch
position
LEDcolor
Comment
Red Green Blue
Inverter
configuration
or reboot
ON / P ON ON ON
Inverter
firmware
upgrade
ON / P Alternating Alternating Alternating
The upgrade
process can take
up to 5 minutes
Error Any ON
ON/ OFF/
Blinking/
Flickering
ON/ OFF /
Blinking
Refer to Errors
and
Troubleshooting
on page 79
The following table describes producution percentage of AC information by LED color
and ON/OFF/P switch position.
Indication
ON/
OFF/ P
switch
position
LEDcolor
Comment
Red Green Blue
Percentage of AC
Production:
0 %
ON (1)
OFF OFF OFF
This indicates
power
production as
percentage of
rated peak AC
output power
Percentage of AC
Production:
0 - 33 %
OFF ON OFF
Percentage of AC
Production:
33 - 66 %
OFF OFF ON
Percentage of AC
Production:
66 - 100 %
OFF ON ON
DC Safety Unit, including:
ON/OFF switch: connects and disconnects the DC power of the system
AC conduit entries for connection to the grid
DC AC conduit entries for connection of the PV installation
-Three Phase System Installation Guide MAN-01-00527-1.2
32 Inverter Interfaces