Chapter 4: Status, Errors and
Troubleshooting
This section describes how to use the Wi-Fi Gateway push
button to check the system status, edit parameters,
troubleshoot errors, or reset the device.
Accessing the Wi-Fi Gateway Web Page
You can check or edit Wi-Fi Gateway parameters by accessing
a web page. The web page allows selecting a Wi-Fi channel,
and enables the device to broadcast its factory MAC address
for 15 minutes for monitoring purposes. Note that Wi-Fi
connectivity will be lost during this period.
The web page is accessible while the Wi-Fi Gateway is
connected to the router via Ethernet (Operational mode).
If there is no Ethernet connection (Maintenance mode), you
can use the Wi-Fi Gateway/repeater push button to access the
web page.
Wi-Fi Gateway and Repeater Installation Guide MAN-01-00559-1.1
Chapter 4: Status, Errors and Troubleshooting 23
To Next Page
Loading...
General