To access the web-page when the Wi-Fi Gateway is in
Maintenance mode:
1. Press the push-button for more than 4 seconds. The Wi-Fi
Gateway attempts to establish connection with a mobile
device.
2. On your mobile device, access the list of Wi-Fi networks.
The list will now contain one or more access points, as
follows:
For Wi-Fi Gateway: SEDG-GW-MAINT[xx]
For Wi-Fi repeater: SEDG-RPTR-MAINT[xx]
3. Select one of the above access points to view its
parameters.
4.
Enter password: the 4 last digits of the Wi-Fi Gateway serial
number (printed on the QR label). The web page is
displayed.
The following is a web page example of the Wi-Fi Gateway
Maintenance mode:
Wi-Fi Gateway and Repeater Installation Guide MAN-01-00559-1.1
Chapter 4: Status, Errors and Troubleshooting 25
To Next Page