SolaStat SolaStat-Plus - SolaStat-Plus System Adjustable Values; Installer Details

19.01-6
SolaStat-Plus System Adjustable Values.
Installer to fill in at installation time or after any change in program Adjustable Values.
*Functional with SolaStat-Plus-2 only.
Notes.
1. Pump ON must always be higher than Pump OFF.
2. Reheat upper must always be higher than Reheat lower.
3. A disabled value is indicated by ‘OFF‘
seulaVelbatsujdAmetsyS
noitcnuF
1-sulP-tatSaloS
seulaVyrotcaF
2-sulP-tatSaloS
seulaVyrotcaF
noitallatsnI
seulaV
FFOpmuP
C6C6C____
NOpmuP
C21C21C____
*remiTffodloH
ffosrh4srh___
*rewoLtaeheR
ffoC04C____
*reppUtaeheR
ffoC55C____
*efaSoiB
ffoC06C____
tuopoT
C08C08C____
tsorF
C4C4C____
Installer Details.
Contact: ................................................................................................
Phone: ................................................................................................
Address: ................................................................................................
................................................................................................
................................................................................................