Need help?Do you have a question about the SolaStat SolaStat-Plus and is the answer not in the manual?
Highlights the key attributes and capabilities of the SolaStat-Plus.
Basic introduction to the SolaStat-Plus controller.
Details on product models, options, and how to order.
Explains how the controller measures temperatures and operates the pump.
Functionality of the pump timer for cavitation recovery.
How low collector temperatures prevent pump activation.
System's ability to detect and report sensor issues.
Mode initiated by sensor errors or critical conditions.
Manual control option for the circulation pump.
Section for recording installer contact and address information.
General guidelines for safe installation and maintenance.
Specific site and environmental considerations for installation.
Warnings and guidelines for electrical connections and safety.
Guidance on direct wiring the HWC element and associated risks.
Managing existing over-temperature cutouts in hot water cylinders.
Recommendations for the physical location of the controller.
Step-by-step guide for physically attaching the unit to a wall.
Critical instructions for installing temperature sensors correctly.
How to connect the circulation pump to the unit.
Connecting the Hot Water Cylinder output using SolaStat-Rly.
Diagram and overview for basic SolaStat-Plus-1 setup.
Diagram and overview for basic SolaStat-Plus-2 setup.
Expected display and light status after powering on the unit.
Timing of BioSafe and Holdoff timers upon initial power-up.
Detailed instructions for navigating and setting adjustable values.
Important notes regarding programming, including differential settings.
Visual representation of the HWC output control logic.
Illustrates the four HWC operational modes with examples.
Setting for minimum desired tank temperature before element activation.
Setting for maximum desired tank temperature to turn off element.
Safeguard against legionella by heating tank to a safe temperature.
Information and disclaimers regarding the BioSafe function and health.
Guidelines for extending sensor cables.
Procedure for safely replacing a faulty temperature sensor.
Details on voltage requirements and power consumption.
Specifications for the pump and HWC relay outputs.
Technical details of the temperature sensors used.
Range of configurable parameters for pump and frost control.
Range of configurable parameters for Hot Water Cylinder control.
Information on electromagnetic compatibility and safety standards.
Operating conditions, enclosure, dimensions, and weight.
Disclaimer regarding product guarantees and liability.
Disclaimer regarding plumbing advice and professional installation.
General introduction to plumbing considerations for solar hot water systems.
Key plumbing components and considerations specific to solar systems.
General| Brand | SolaStat |
|---|---|
| Model | SolaStat-Plus |
| Category | Control Panel |
| Language | English |
To Next Page