7. Decommissioning
34
35
7 Decommissioning
7.1 Dismantling the Battery
Shutting down T-BAT system
Disconnect the cables between BMS and Inverter
Disconnect the series wiring terminal on the ended battery.
Disconnect the other cables.
7.2 Packing
Please pack the BMS and battery modules with the original packaging.
If it is no longer available, you can also use an equivalent carton that meets the
following requirements.
Ÿ Suitable for loads more than 30kg
Ÿ With handle
Ÿ Can be fully closed
7. Decommissioning
To Previous Page
Loading...
Need help?
General
