To Next PageTo Next PageHow to fix BMS_External_Err on SolaX Power Camera Accessories?
To address the BMS_External_Err with your SolaX Power Camera Accessories, first ensure that the communication cable between the BMS and the inverter is correctly and securely connected.
What to do if there is a BMS_Relay_Fault in SolaX Power T-BAT?
If you encounter a BMS_Relay_Fault with your SolaX Power Camera Accessories, first ensure the power cable is correctly connected to the power connector (XPLUG) of the BMS. If the issue persists, it is recommended to contact SolaX after-sales service or your distributor directly.
Why is there a BMS_Internal_Err on my SolaX Power T-BAT?
If your SolaX Power Camera Accessories display a BMS_Internal_Err, it could be due to: 1. A DIP switch at the wrong position. 2. Interrupted communication between battery modules. To resolve this: 1. Move the DIP switch to the correct position. 2. Check the communication cable between the battery modules to ensure it is correctly and well connected.
What to do if SolaX Power Camera Accessories show BMS_TemHigh error?
If your SolaX Power Camera Accessories are showing BMS_TemHigh or BMS_TemLow, wait until the temperature of the cells returns to a normal state.
What to do if SolaX Power T-BAT Camera Accessories show BMS_TemLow error?
If your SolaX Power Camera Accessories are showing BMS_TemHigh or BMS_TemLow, wait until the temperature of the cells returns to a normal state.
General| Nominal Voltage | 51.2V |
|---|---|
| Maximum Discharge Current | 100A |
| Warranty | 10 years |
| Battery Type | Lithium Iron Phosphate (LiFePO4) |
| Scalability | Up to 4 modules in parallel |
| Communication | CAN, RS485 |
| Operating Temperature | -10°C to 50°C |
| Cycle Life | 6000 cycles at 80% DoD |
Describes assembly, installation, commissioning, maintenance, and failure of the product.
Manual is for qualified electricians; tasks must be performed by them.
Explains DANGER, WARNING, CAUTION, and NOTE symbols used in the manual.
Installers must familiarize themselves with manual and warnings before installation.
Lists precautions regarding explosion, fire, electric shock, and damage to the battery.
Explains symbols on the T-BAT system and warning labels.
Provides actions for leaking batteries, fire, and handling wet/damaged batteries.
Details actions for inhalation, eye, dermal contact, and ingestion of battery electrolyte.
Instructs on fire extinguishing, warning about poisonous gases from battery fire.
Advises against using wet or damaged batteries and how to return them.
Defines a skilled worker and required skills for installation.
Introduces BMS, battery, and battery system components.
Lists dimensions and weights for T-BAT H 5.8 and HV11550 models.
Shows sectional views and lists components for T-BAT H 5.8 and HV11550.
Lists key features of the T-BAT SYS-HV system.
Highlights advanced technology, reliability, and control features of T-BAT SYS-HV.
Lists safety certifications like CE, FCC, RCM, TUV, UL, UN.
Details system configurations, performance metrics, and operating conditions.
Provides a list of models, battery packs, energy, and voltage configurations.
Lists performance data including dimensions, weight, voltage, capacity, currents, efficiency, and lifetime.
Lists conditions for installation location, including building resistance, environment, and temperature.
Emphasizes wearing safety gear for installation to avoid injury.
Lists required tools for installing the T-BAT system.
Instructs to check battery for damage during transportation and contact dealer if found.
Guides on unpacking, verifying components, and contacting SolaX if items are missing.
Lists and illustrates all accessories for T-BAT H 5.8 and HV11550 models.
Provides step-by-step instructions for mounting the battery on a wall bracket.
Details how to connect various cables for the T-BAT system installation.
Explains connecting power cables to form a complete circuit between battery packs.
Guides on connecting power cables between the T-BAT system and the inverter.
Instructions on how to safely disconnect power cables from the battery system.
Explains connecting the CAN cable for BMS-inverter communication.
Details connecting RS485 cables for communication between battery packs.
Instructions for making a mandatory ground connection for safety.
Provides guidance on routing and securing cables for the overall installation.
Shows a diagram of a completed T-BAT system installation with multiple battery packs.
Explains using the DIP switch to configure the number of battery packs for the inverter.
Details the commissioning process, including self-testing and potential errors.
Explains the meaning of LED indicators on the battery pack for status and capacity.
Describes the status of the BMS system through LED indicators and a table.
Explains the status indicators (S1, S2) for the battery pack itself.
Provides step-by-step instructions for safely shutting down the T-BAT system.
Guides on checking indicators and software for troubleshooting system warnings and faults.
Lists common warning messages from the T-BAT system and their corresponding troubleshooting steps.
Steps for safely shutting down and disconnecting the T-BAT system.
Instructions for packing the BMS and battery modules for storage or return.
Recommends periodic recharging of batteries based on ambient storage temperature.
Outlines the product warranty, conditions, and exclusions for SolaX products.
