8. Decommissioning
8.1 Decommissioning
8.2 Storage and Transportation
8.3 Disposal
8. Decommissioning
Disconnect the inverter from DC input and AC output.
Remove all connection cables from the inverter.
Remove the inverter from the bracket.
If possible, please pack the inverter with the original packaging.
If it is no longer available, you can also use an equivalent carton that meets the
following requirements.
Suitable for loads more than 30kg.
With handle.
Can be fully closed.
Store the inverter in dry place where ambient temperature are always between
-20℃ ~ +60℃ . Take care of the inverter during the storage and transportation,
keep less than 4 cartoons in one stack.
Please be sure to deliver wasted inverter and packing materials to certain site,
where can assist relevant department to dispose to and recycle.
30
To Previous Page
Loading...
Need help?
General
