What should I do if my SolaX Power X1-Hybrid-3.0-LV displays 'Arc fault'?
If your SolaX Power Inverter is showing an 'Arc fault' message, wait for a while and observe if it returns to normal operation.
What to do if my SolaX Power X1-Hybrid-3.0-LV Inverter displays 'PV connection configuration error'?
If your SolaX Power Inverter shows a 'PV connection configuration error', turn off the PV, battery, and power grid. Then, restart the inverter and confirm whether the PV connection is correct.
What should I check if my SolaX Power Inverter displays 'Battery voltage is too high'?
If your SolaX Power Inverter displays 'Battery voltage is too high', check whether the battery output voltage is within the normal range.
What to do if SolaX Power Inverter displays 'Frequency configuration mismatch'?
If your SolaX Power Inverter shows a 'Frequency configuration mismatch', check whether the frequency is within the correct range.
What to do if SolaX Power X1-Hybrid-3.0-LV Inverter displays 'PV1 reverse connection'?
If your SolaX Power Inverter indicates 'PV1 reverse connection', turn off the PV, battery, and power grid, restart the inverter, and check the connection status of the positive and negative poles of PV1.
What to do if SolaX Power X1-Hybrid-3.0-LV Inverter displays 'PV2 reverse connection'?
If your SolaX Power Inverter indicates 'PV2 reverse connection', turn off the PV, battery, and power grid, restart the inverter, and check the connection status of the positive and negative poles of PV2.
How to troubleshoot 'Internal fan failed' on my SolaX Power X1-Hybrid-3.0-LV Inverter?
If the 'Internal fan failed' message appears on your SolaX Power Inverter, check whether there is any foreign matter inside the fan.
How to troubleshoot 'External fan failed' on my SolaX Power X1-Hybrid-3.0-LV Inverter?
If the 'External fan failed' message appears on your SolaX Power Inverter, check whether there is any foreign matter inside the fan.
What to do if my SolaX Power Inverter shows 'Overload self-locking'?
If your SolaX Power Inverter displays an 'Overload self-locking' error, turn off high-power load, PV, battery and power grid, and restart the inverter.
What to do if SolaX Power Inverter shows '1.1 times overload'?
If your SolaX Power Inverter displays '1.1 times overload', turn off any high-power load connected to the inverter.
General| Brand | SolaX Power |
|---|---|
| Model | X1-Hybrid-3.0-LV |
| Category | Inverter |
| Language | English |
To Next Page
