Safety
08
■ Battery Safety Instructions
This inverter should pair with high voltage battery, for the specic parameters
such as battery type, nominal voltage and nominal capacity etc., please refer
to 4.4 Battery Data.
Refer to the matching battery specication for details.
according to STANDARD specication.
• Do not connect the grounding end of the equipment in series to prevent
multi-point grounding.
• Electrical appliances must be installed in accordance with the wiring rules
of each country.
For United Kingdom
• The installation that connects the equipment to the supply terminals shall
comply with the requirements of BS 7671.
• Electrical installation of PV system shall comply with requirements of BS
7671 and IEC 60364-7-712.
• All protective devices cannot be changed.
• User shall ensure that equipment is so installed, designed and operated to
maintain at all times compliance with the requirements of ESQCR22(1)(a).
To Next Page
Loading...
