Setting
73
The main interface is the default interface, the inverter will automatically re-
turn to this interface when the system started up successfully or not operated
for a period of time.The information of the interface is as below. You can tap
the circles to check basic information of the inverter and battery.
8.3 LCD Operation
The menu interface is another interface for users to change settings or obtain
information. When the LCD displays the main interface, tap the circle in the
middle of the main interface screen to enter the main menu.
The user can press the up/down bottom or touch the screen to select up and
down the menu, press the enter bottom or tap the "
√
" on the screen to save
the settings, and press the Esc button to return to the superior interface.
8.3.1 Main menu
8.3.2 Main interface
If there is a fault currently, one of the faults will be displayed on the main interface. To view details,
please enter Main menu "Inverter information" -> "Error Infor" to check the current and historical faults.
Work Mode
SettingsMain Menu
Power ON/OFF
About
Error Infor
To Next Page
Loading...
