EasyManua.ls Logo

SolaX Power X1 Series - Explanation of Symbols

SolaX Power X1 Series
63 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
11
Safety
2.2 Explanation of Symbols
This section gives an explanation of all the symbols shown on the inverter
and on the type label.
The inverter can not be disposed together with the
household waste. Disposal information can be found in the
enclosed documentation.
Do not operate this inverter until it is isolated from battery,
mains and on-site PV generation suppliers.
Danger to life due to high voltage. There is residual voltage
existing in the inverter after powering off, which needs 5 min
to discharge. Wait 5 min before you open the upper lid or
the DC lid.
Beware of hot surface.
The inverter can become hot during operation. Avoid
contact during operation.
Danger of high voltages.
Danger to life due to high voltages in the inverter!
Danger.
Risk of electric shock!
Observe enclosed documentation.
Battery status
Operating Display
Fault indicator
Symbols on the Inverter
Symbols
Symbols on the Type Label
TUV certified.
RCM remark.
CE mark.
The inverter complies with the requirements of the
applicable CE guidelines.
UKCA mark.
The inverter complies with the requirements of the
applicable UKCA guidelines.
Symbols
Obesrve enclosed documentation.

Other manuals for SolaX Power X1 Series

Related product manuals