34
6 System Operation
6 1 Powering ON the Inverter.
Step 1: Switch ON the AC circuit breaker.
.Set the DC SWITCH of the inverter to ON
. .Observe statuses of LED indicator lights on the inverter according to Table 7 2
Step 2:
Step 3:
When LED status lights display the inverter has entered
grid-connecting it means the inverter is operating well Any query, .
during operating the PV inverter call your dealer, .
6 2 Powering OFF the Inverter.
Step 1: Switch off the circuit breaker at AC terminal.
Step 2: Set the DC SWITCH to OFF.
After the inverter powers off the remaining electricity and heat may,
still cause electrical shock and body burns Please only begin.
servicing the inverter ten minutes after the power-off.
WARNING
NOTE
To Next Page
Loading...
