Communication Connection Steps:
Ø
Step3. Insert the communication terminal into the BMS port.
Battery BMS module port(Pylontech: RS485 port; Triple Power: CAN port; Please
check the battery manual for more details).
Step1. Disassemble the BMS cable gland.
Step2. Prepare a communication cable(without sheath) and insert the commu-
nication cable through the cable nut.
Step1,2
6.6 Earth Connection(mandatory)
User can addtionally earth the inverter to the enclosure of a second earthing or
equipotential bonding if it is required by local safety. This prevents electric shock
if the original protective conductor fails.
Earth Connection Steps:
Ø
Step2. Place the ring terminal into the grounding rod and tighten the grounding
screw with a screwdriver.
Step1. Strip the earthing cable insulation and insert the stripped cable into the
ring terminal, then clamp it .
Electrical ConnectionElectrical Connection
36
37
Cable size: 12AWG.
ring terminal
Step1
Step2
B
M
S
Step3
Tighten torque:3.0Nm
Torque:1.5Nm
To Next Page
Loading...
