8.3 LCD Operation
● Status
The status function contains six items of the inverter(grid, solar, charger, Charger-
Setting,eps and Load).
Press up and down to select and press “OK” to confirm the selection, press “ESC” to
return to Menu.
a) Grid
This status shows the current grid condition such as voltage, current, output
power, the local consumed power and frequency.
Pout measures the output of inverter;
Pgrid measures power export to or import from grid.
Positive value means the energy feeds into grid, negative value means the energy
used from the grid.
LCD Digital Display
The main interface is the default interface, the inverter will automatically jump to
this interface when the system started up successfully or not operated for a
period of time.
The information of the interface is as below. “Power” means the instant output
power; “Today” means the power generated within the day. “Battery” means the
left capacity of battery energy.
Power 0W
Today 0.0KWh
Battery %
Normal
Status
History
Settings
Menu
Menu interface
The menu interface is a transfer interface for user to get into another interface to
change the setting or getting the information.
-User can get into this interface by pressing “OK” button when LCD displays the
main interface.
-User can select interface by moving the cursor with function button，and press
“OK” to confirm.
Menu
Status
History
Setting
System Switch
About
Ø
Status
Grid
Solar
Charger
Status
>Ua 0.0V
Ia 0.0A
PaOut 0W
InvState A
b) Solar
This status shows the real time PV condition of the system, such as input
voltage, current and power situation of each PV input.
U1 600.0V
I1 7.0A
P1 4200W
Solar
50
51
Setting Setting
Power Meter 1
Power Meter 2
Power Meter 3
Grid
Grid
Solar
Charger
EPS
Load
Status
Charger setting
To Next Page
Loading...
