f ) Load
If the inverter is plugged with a smart plug, this status shows the real time
load power, include load1 power and load 2 power.
L1 Power
0W
Load
c) Charger
This status shows the charger situation of the system. Include the battery
voltage, charge or discharge current. Charge or discharge power, battery
capacity, battery temperature, BMS status, charge and discharge limit. “+”
means in charging; “-” means in discharging.
U 400.0V
I -1.0A
P -400W
Charger
e) EPS
EPS will only have data when the inverter is working in EPS mode, it will show the
real time data of the EPS output such as voltage, current, power.
EPS_State A
Ua 0.0V
Ia 0.0A
PaActive 0W
Ø
History
● History
The history function contains seven items of the information: Inverter yield, charger
yield, EPS yield, load consume, feed in energy, system run time and error logs.
Press up and down to select and press “OK” to confirm the selection, press “ESC” to
return to Menu.
a) Inverter Yield
This function contains inverter yield for today, yesterday ,this month ,last month
and total.
>OutputGridToday
00.0KWh
Inverter Yield
Setting Setting
52
53
History
Inverter Yield
Meter Yield
Error Log
Load Consume
System RunTime
EPS Yield
>Today:
00.0KWh
EPS Yield
b) EPS Yield
The EPS Yield function contains charger yield for today and total.
EPS_S
PaS 0VA
PbS
PcS 0VA
> >
0VA
Inverter Yield
EPS Yield
Load Consume
History
d) Charger-Setting
Here you can see the parameters of the battery Settings (lithium battery and
lead-acid battery).
Min Capacity 10%
MaxChCur 19.0A
Max DisChCur 25.0A
Charger-Setting
Inv Warning
Charge Absorp 0,0V
Chargr Float Vot 0.0V
DischargeCUtVot 0.0V
Charge MaxCU 0.0A
Discharge MaxCU 0.0A
Charger-Setting
To Next Page
Loading...
