1.1 Scope of Validity
This manual is an integral part of X3-Hybrid, It describes the assembly, installation,
commissioning, maintenance and failure of the product. Please read it carefully
before operating.
Note: “5.0” means 5.0kW.
“D” means with “DC Switch”, ”N” means without “DC Switch”.
“E” means “EPS function” will be available with an external changeover
device installed.
“C “ means without”EPS function”.
Store this manual where it will be accessible at all times.
1.2 Target Group
This manual is for qualified electricians. The tasks described in this manual only
can be performed by qualified electricians.
1.3 Symbols Used
The following types of safety instructions and general information appear in this
document as described below:
1 Notes on this Manual
Notes on this ManualContents
Note！
“Note” provides tips that are valuable for the optimal operation of
our product.
Warning!
“Warning” indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
03
8. Setting
8.1 Control Panel
8.2 Menu Structure
8.3 LCD Operation
9. Troubleshooting
9.1 Trouble Shooting
9.2 Routine Maintenance
10. Decommissioning
Dismantling the Inverter10.1
Packaging10.2
Storage and Transportation10.3
48
48
49
50
6.5 Battery Connection
6.6 Earth Connection(mandatory)
6.7 Meter Connection
6.8 LAN Connection
6.9 DRM Connection
6.10 Monitoring Connection(optional)
6.11 Inverter Manipulation
34
37
38
41
42
43
44
7. Firmware Upgrading
46
72
72
76
77
77
77
77
02
Danger！
“Danger” indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
Caution！
“Caution” indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
X3-Hybrid-5.0-N-E X3-Hybrid-6.0-N-E X3-Hybrid-10.0-N-EX3-Hybrid-8.0-N-E
X3-Hybrid-5.0-D-E X3-Hybrid-6.0-D-E X3-Hybrid-10.0-D-EX3-Hybrid-8.0-D-E
X3-Hybrid-5.0-N-C X3-Hybrid-6.0-N-C X3-Hybrid-10.0-N-CX3-Hybrid-8.0-N-C
X3-Hybrid-5.0-D-C X3-Hybrid-6.0-D-C X3-Hybrid-10.0-D-CX3-Hybrid-8.0-D-C
To Next Page
Loading...
