(Note: Users need to make a copy of the SN number for the future use in login the X
-Monitoring
system)
Figure 4, Basic settings page
Figure 5, check the WIFI signal strength
(Note: a signal strength of 50% or more is recommended).
Now that connectivity is established, you can disconnect from the W IFI network
‘SolaX_xxxxxx’ on the laptop/tablet you are using and reconnect to the home WIFI network
ready for stage 2 of the process.
3
(3) Click the "Find AP" at the right side of SSID as shown in figure 4.There Will be an
Scan page, it will search for the signal of the WIFI router around, and there will be
a list as figure 5. The SSID is the WIFI router’s SSID, signal means the strength
of the router. 100% means the router has a good signal, 0% means the router
has no signal here.
To Next Page
Loading...
Need help?
General
