Solid State Cooling Systems THERMOCUBE 300 - Section 1; Introduction

THERMOCUBE 200/300/400 THERMOELECTRIC CHILLER MANUAL 52-11300-1
SOLID STATE COOLING SYSTEMS, 167 MYERS CORNERS ROAD, WAPPINGERS FALLS, NY 12590 4
TELEPHONE: (845) 296-1300 FAX: (845) 296-1303 WEB: WWW.SSCOOLING.COM VERSION M28
Manual
THERMOCUBE 200/300/400
THERMOELECTRIC CHILLER
SECTION 1
I
NTRODUCTION __________________________________________________
The ThermoCube 200/300/400 recirculating chiller utilizes
thermoelectric technology to deliver up to 400 Watts of cooling
capacity without the use of compressors or refrigerants. The system
provides 1 to 3 liters per minute of constant temperature coolant,
with PID control for both cooling and heating. With fewer moving
parts, the system is highly reliable and energy efficient.
The ThermoCube 200/300/400 systems provide stable and precise
temperature control for a variety of applications, lasers, low-light
CCD cameras, analytical equipment, medical equipment, testing,
microelectronics production, and any other application requiring
±0.05°C control. The units include a cycling feature where two
different temperature set points may be entered with soak time at
each temperature and number of cycles desired.
The ThermoCube recirculating chillers are highly customizable,
with many different options available, which allow us to specifically
configure the system for your particular application.
From conception, The ThermoCube 200/300/400 systems have been
designed for long life and ease of use. The internal thermoelectric
modules have lifetimes greater than 200,000 hours.
P
RODUCT