THERMOCUBE PAO CHILLER PART # 52-400-2G-1-PAO
SOLID STATE COOLING SYSTEMS, 167 MYERS CORNERS ROAD, WAPPINGERS FALLS, NY 12590 26
TELEPHONE: (845) 296-1300 FAX: (845) 296-1303 WEB: WWW.SSCOOLING.COM VERSION M9
SECTION 6. ACCIDENTAL RELEASE MEASURES
Absorb with an inert material and put the spilled material in an appropriate waste disposal.
Absorb with an inert material and put the spilled material in an appropriate waste disposal. Do not allow
any potentially contaminated water including rain water, runoff from fire fighting or spills to enter any
waterway, sewer or drain. Note: See section 8 for personal protective equipment and section 13 for
waste disposal.
SECTION 7. HANDLING AND STORAGE
Avoid breathing vapors or spray mists. After handling always wash hands thoroughly with
soap and water. Avoid contact with eyes skin and clothing. Use with adequate ventilation.
Keep container tightly closed. Store in a dry cool and well-ventilated area.
SECTION 8. EXPOSURE CONTROLS, PERSONAL PROTECTION
Good general ventilation should be sufficient to control airborne levels. Ensure that eyewash
stations and safety showers are proximal to the work-station on location.
A respirator is not needed under normal and intended conditions of product use.
Chemical resistant gloves.
Protective Clothing :
(Pictograms)
Personal Protection in Case of a :
Large Spill
Splash goggles. Full suit. Vapor respirator. Boots. Chemical resistant gloves. A self-contained
breathing apparatus should be used to avoid inhalation of the product.
ROYCO
(R)
602
Exposure Limits
1-Decene, Dimer, Hydrogenated Not available.
Consult local authorities for acceptable exposure limits.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Physical State and appearance :
Liquid. (Clear sparkling liquid)
Boiling/Condensation Point :