Solid State Logic SSL 2+ MKII - Page 8

06/09/2024, 17:03SSL 2+ MKII User Guide – SSL Support
Page 8 of 38https://cdn.printfriendly.com/assets/client/algo-6f51604695c926a5083000e22d39f39d7a7d79d42d7b84f2593ec5ba06aae02c.html
2. Download and install the SSL USB ASIO/WDM audio driver for your SSL
2+ MKII. Go to the following web address:
www.solidstatelogic.com/support/downloads
3. Go to ‘Control Panel’ then ‘Sound Settings’ and select ‘SSL 2+ MKII USB’
as the default device on both the ‘Playback’ and ‘Recording’ tabs