Studio One Tutorial
70
SSL UF8 User Guide
V-Pot Assignment Modes
UF8 offers direct access to Studio One's five main Mackie Control V-Pot assignment modes. These V-Pot assignment modes are
accessed via the keys labelled below: 1. PAN, 2. SEND, 3. INSERT BYPASS, 4. TRACK and 5. PLUGIN.
1 - PAN
Assigns the Pan controls to the V-Pots on UF8. Pushing a V-Pot will default the Pan position to centre.
2 - SEND
Assigns the Send controls to the V-Pots. Pushing the V-Pot defaults the Send to 0 dB.
The first press of the SEND key will place the Sends of the selected
track across the V-Pots and their values will be displayed in the
LowLCD zone. The CHANNEL key on UF8 will also light.
Repeatedly pressing the SEND key will cycle the V-Pots through controlling a specific Send 'slot' across
all tracks at once. The particular send slot being controlled is reflected by the lighting of the SEND /
PLUGIN Number Keys 1-8 on the left-hand side.
1
2 3 4
5
The CHANNEL key lights to let you know the V-Pots
are controlling the Sends on the selected track.
Repeatedly press the SEND key to cycle the V-Pots
into controlling a particular Send slot across all
tracks.
To Next Page
Loading...
Need help?
General
