Custom setting
You can customize the following features to suit your preference.
1 Which positioning system to be used GPS Beidou or . , , ,
GPS+Beidou. The default is GPS+Beidou double positioning.
2 The display format of latitude and longitude.
or
3 Enable the Indoor fixing” or disable it. Indoor fixing means when . “
you are into a place where is no a GPS signal the receiver is ,
able to provide the last GPS information.
4 The backlight of the LCD is on or off. .
5.Signal acquisition indicator and Bluetoot/Log indicator are on or off .
6 The beep” voice is on or off while pressing the button. “ .
7 Enable the compass function or disable it. .
8 Compass calibration. .
9 Which direction data displayed, the data is based on true . north
or magnetic north .
10 Level calibration. .
11 Select the speed unit, Mile, Kilometer or. Knots.
12 Select the altitude unit meter or feet. , .
Select which altitude data to be displayed the data is from GPS/BDS ,
or atmospheric pressure.
13 What kind of time to be shown on the LCD, UTC or Local time..
The local time can be set.
14 The date display format DD.MM. YYYY MM. DD.YYYY, or . , ,
YYYY. MM. DD
15 The temperature unit, Fahrenheit or Centigrade The temperature. .
is the temperature inside of the receiver .
16 The air pressure unit psi hpa or bar. : , , .
17 GPS/BDS working frequency and the working time of each time in.
Auto .mode
18 GPS/BDS working frequency and the working time of each time in .
Clock mode The time can be adjusted by GPS/BDS, which make . (
the time accurate ).
13
To Next Page
Loading...
