Charging
The receiver is equipped a high-capacity lithium rechargeable battery,
a full charge supports more than 18 hours of continuous work. The
receiver can be charged by using any USB port that provides standard
5 volts.
Note
3-4 hours for a full charge. The battery icon in the LCD shows
the battery level.
The current voltage of battery can be checked anytime in custom
setting.
When the power close to run out, the battery icon will flash.
After about 10 minutes, the receiver will automatically switch to
the camera’s power and the battery icon will not be displayed
LCD.
use
in the
6
To Next Page
Loading...
