GPS/BDS logger
The GMAX can be used as a data logger. When the GMAX is GPS/BDS
signal fixed, location information can be automatically recorded on
the receiver itself along the route traveled. (There is no need to
connect the receiver to the camera.
The recorded location information can be viewed on a virtual map.
Logs can also be used to geotag images at a later time.
The flash memory can be easily read by the computer via USB
connection. Just like a “U flash driver”, no software needed.
Log file can be saved or deleted on the computer.
The file system supports FAT32 format.
)
Location information is recorded at regular intervals with the receiver.
You can specify the positioning interval via the custom setting. The
default is every 10 seconds. For how to set the interval see page 31.
The GMAX supports more than 170 days continuous log record at the
interval of 1 sec.
To check the logging record status, watch the logging indicator and the
icon on the LCD.
Red blinking: The logging indicator will blink once while the
location information recorded.
icon also will blink once while the location information
recorded.
11
To Next Page
Loading...
