Features
Geotagging Images and Adding the Shooting Direction
When the receiver is attached to the camera, the location information
(latitude, longitude, elevation) and shooting time (UTC, Coordinated
Universal Time) can be added to the images as they are taken.
Images can also be tagged with the shooting direction by using the
receiver’s digital compass.
GPS/BDS logger
The receiver can be used as a tracing logger which keeps a record of
location information along the route traveled.
Build in 4GB memory card, the user no longer worry whether the storage
space is enough or not. The 4GB memory supports more than 170 days
continuous log record at the interval of 1 sec.
Using as an accuracy clock
The receiver can be used as an accuracy clock. The accuracy is based
on the time could be adjusted by GPS/BDS .
Timer release
The receiver can be used as an external timer release device when it
connected to a camera.
You can set the shooting start time, shooting end time and the interval
via the custom setting
Wireless remoter
While a Solmeta APP installed in your mobile phone,
the GMAX and your mobile phone can be used as a wireless
remoter (See page 34)
which intermittently
.
“ GMAX-Remoter ”
together
.
3
To Next Page
Loading...