Hardware Installation 11
System Memory Configuration
This Apollo MVP3 motherboard supports 72-pin SIMMs and
168pin DIMMs (3.3V unbuffered type) of 4MB, 8MB, 16MB,
or 32MB to form a memory size between 4MB to 1GB (total
of 6 rows are supported).
The Apollo MVP3 chipset supports ÒTable FreeÓ
configuration so that DRAM module can be installed at any
capacity.
Note: 1. Do not recommend to mix EDO and SDRAM
together for the system stability.
2. For 100MHz CPU environment, the SDRAM must
compliant PC-100 specification, otherwise the
system maybe unstable.
Jumper Settings
JP2: Clear CMOS Data
Clear the CMOS memory by shorting this jumper on 2Ð3
momentarily; then remove the cap to retain new settings.
COMS Data JP2
Retain Data
(default)
3
1
Clear Data
3
1
To Next Page
Loading...
