SOLTEK SL–54U5 - Pnp;Pci Configuration Setup

30
LPT & COM Use the default setting.
HDD & FDD Use the default setting.
DMA/Master Use the default setting.
Modem Ring
Resume
Enabled: Wake up the system
from ring signal.
Disabled: (default) Ring signal can
not wake up the system.
RTC Alarm
Resume
Enabled: Wake up the system at
specified time (user must
define the time.)
Disabled: (default) turn off this
function.
Primary INTR Use the default setting.
IRQ x Set these IRQs individually.
Activity detected from any enabled
IRQ channel (ON) will wake up the
system.
3. Press <ESC> and follow the screen instructions to save or
disregard your settings.
PnP/PCI Configuration Setup
PnP/PCI Configuration Setup configures the PCI bus slots.
Run the PnP/PCI Configuration Setup as follows:
1. Choose ÒPnP/PCI CONFIGURATION SETUPÓ from the
Main Menu and a screen with a list of options appears.