Copyright © 2008 Somfy SAS. All rights reserved.
2.2 Operating
Somfy recommends that at least one control point is located close to the product or group of -
products.
Do not allow children to play with the fi xed control points. Keep remote controls out of the reach
-
of children.
Monitor the product (especially roller shutter/awning/garage door/gate) while it is moving, espe-
-
cially during commissioning of the Chronis Smart RTS, and keep people at a distance until the
product is completely closed.
Make sure the power supply to the product is turned off before any maintenance operation in the
-
vicinity of the product (for example, when cleaning windows near your awning).
Avoid moving the product if ice has formed in it, unless the motor is fi tted with anti-freeze
-
protection.
Do not immerse or soak the Chronis Smart RTS in any liquid.
-
Only use maintenance products recommended by Somfy. -
Frequently check the product (e.g. awning) to detect any defects in balance or any signs of -
wear. Do not use the product if a repair or adjustment is required.
2.3 Environment
Damaged electrical or electronic products, such as used batteries, should not be disposed of with
household waste. Please take them to a collection point or an approved centre to ensure they
are recycled correctly.
3. Content of the kit and tools required
3.1 List of parts
Before starting installation and commissioning of the Chronis Smart RTS, check that all parts
listed in the table below are present in the correct quan-
tity (Q):
No. Components Q.
1Front cover 1
2Timer 1
3Wall support 1
4Battery: 1.5 V DC (type AAA
LR03)
2
5M3 x 20 mm screw 2
66 mm plug
∅ 2
3.2 Tools required
• Appropriate screwdriver for the screws to be used
Insulated fl athead electricians screwdriver•
Drill and drill bit•
Pencil•
Chronis Smart RTS
4
3
5
1
2
4
6
To Next Page
Loading...
Need help?
General
