Name: SOMFY Chronis Smart RTS
Brand: SOMFY
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Chronis Smart RTS

6.2.2 Adding the Chronis Smart RTS

Model A:

- Make a contact between the PROG metal plate on the

electrical circuit and the battery bracket using a ﬂ at-

head screwdriver until the product moves brieﬂ y (or

there is a series of 3 beeps): the programming function

is activated for approximately 2 minutes.

Take the ne w C hr oni s Smar t RT S .

Brieﬂ y press the PROG button (H) on the new Chronis -

Smart RTS:

“PROG” is displayed on the Chronis Smart RTS

►

screen.

The product will make another brief movement (or

►

emit a series of 8 beeps) to indicate that the new

Chronis Smart RTS has been stored.

Press the down button on the new Chronis Smart

RTS:

If the product is lowered, the Chronis Smart RTS

►

is operational.

If the product does not move, contact the Somfy

►

assistance service.

Replace the original control point front cover:

One-touch point with a white and grey front cover

Insert the mounting lugs into their notches on one -

side of the front cover.

Press on the other side until it clicks, to ﬁ x the front -

cover in its bracket.

One-touch point with a white front cover

Reﬁ t the front cover on its bracket. -

Model B:

- Remove the battery from the original control point using

a ﬂ athead screwdriver.

Press on the centre section of the one-touch point

button.

Replace the battery. -

Press the button again until the product moves brieﬂ y -

(or there is a series of 3 beeps): the programming func-

tion is activated for approximately 2 minutes.

Take the ne w C hr oni s Sma rt RT S .