Need help?Do you have a question about the SOMFY Soliris io and is the answer not in the manual?
General| Wind Threshold | Adjustable |
|---|---|
| Power Supply | Battery |
| Battery Type | Lithium |
| Battery Life | 2 years |
| Color | White |
| Type | Wind and sun sensor |
| Compatibility | io-homecontrol |
| Installation | Wall-mounted |
Overview of the Soliris io sensor, detailing its features, specifications, and key benefits.
Details the application scope of Soliris io for various motorized products, including awnings, pergolas, and shutters.
Illustrates the typical installation and 1W operation for Soliris io in Mode 1 with sun, wind, and rain.
Details the typical installation and 1W operation with receiver intelligence for Soliris io in Mode 2.
Explains the typical installation and 2W operation with TaHoma for Soliris io in Mode 3.
Visual guide showing correct and incorrect mounting orientations for the Soliris io sensor.
Explains the wiring connections for power supply and the Ondeis rain sensor for the Soliris io.
Procedure for pairing Soliris io and Ondeis with actuators in a 1W ecosystem using the 'Prog' function.
Details pairing Soliris io and Ondeis with TaHoma in a 2W ecosystem using the device discovery process.
Describes product reactions to wind in Mode 1, covering 'No Action' and moving to a 'Secured Position'.
Details product reactions to sun appearance/disappearance in Mode 1, such as moving to 'My' or 'Down End Limit'.
Explains product reactions to rain detection in security mode, moving to a secured position and locking.
Details product reactions to rain detection in comfort mode, moving to Down End Limit and locking.
Summarizes actions for combinations of Wind, Rain (Security/Comfort), and Sun in Mode 1.
Explains wind speed thresholds, potentiometer settings, and LED feedback for the Soliris io.
Provides a table mapping Beaufort numbers to corresponding wind speeds in Knots and km/h.
Guide to testing the wind function using the demo mode on the actuator by simulating wind.
Details the sun threshold settings for the Soliris io sensor, correlating Lux values with actions.
To Next Page
