SOMFY SUNIS WIREFREE - User Manual

Sunis Outdoor WireFree™ RTS Sun Sensor
Introduction
Part Number:
9020412
The Sunis Outdoor WireFree™ RTS Sun Sensor provides control of your RTS motorized
awnings, pergolas, exterior screens and rolling shutters based on current sun light levels.
The precise sun level can easily be selected with 8 possible levels of light sensitivity.
Note: The sun function can be enabled/disabled via a Somfy Soliris RTS transmitter.
A transmitter must be provided with each installation to enable/disable the sun function.
Sensor Cover
Alignment
Arrows
Included:
A. Sunis RTS sensor with built
in mounting base
B. 2 AA alkaline batteries
C. 2 mounting screws
Programming
Button (PROG)
Inside Cover
Green LED
Level 5-8
Red LED
Level 1-4
+ Sun
Level
- Sun
Level
Red Battery
LED
Green Battery
LED
Battery
Tray
A.
C.B.
Continued On Next Page

Summary

Introduction

Battery Installation

Mounting

Programming

Setting Sun Threshold Level

Adjust sunlight sensitivity levels using the sensor's + or - buttons, confirmed by LED feedback.

Operation: Demo Mode

SOMFY SUNIS WIREFREE Specifications

General

Type	Sun sensor
Radio frequency	433.42 MHz
Weather Resistance	Yes
Protection rating	IP34
Compatibility	Somfy RTS motors
Power supply	Battery powered
Battery type	2 x AA
Mounting	Wall-mounted