J
Jill DawsonAug 11, 2025
What to do if SOMFY Tilt Only 50 WF RTS Engine shade will only move while I hold a direction?
- RRachel LeeAug 11, 2025
If your SOMFY Engine shade only moves while you hold a direction, it could be due to a few reasons. If you were adjusting a limit from user mode, you need to confirm your new limits by moving the shade to where you want the new limit and then press and HOLD the MY button for a jog. Another possibility is that the motor is still in programming mode, in which case you should go back to step [3] under Programming. If neither of those options work, reset the motor and start over by going to step [9] Erasing Motor Settings.