SONOS USER GUIDE
Controls and lights
Note: If you don’t want anyone (like a child) to control playback or change the volume using the speaker
touch controls, you can disable them in the room’s settings.
Connector panel
Volume control • Touch and hold to quickly change the volume:
• Volume up (right); Volume down (left).
Play/Pause Press to play or pause sound.
Next/Previous song • Swipe right across the touch controls to skip to the
next song.
• Swipe left to go to the previous song.
Note: You can’t skip forward or go back when listening
to a radio station.
Status light Indicates the status. Learn more
If the light is distracting, you can turn it off in your room’s
settings.
IR sensor light The IR (InfraRed) sensor receives the signals sent by a
remote control. When the Playbase receives a volume or
mute command, the IR signal light displays momentarily.
Ethernet port Use the supplied Ethernet cable if you want to connect
to a router, computer, or network-attached storage
(NAS) device (optional). You should only use this port to
plug in either the Playbase, Sonos Bridge, or Sonos
Boost.
Digital audio IN (optical) Use an audio optical cable to connect the Playbase to
your TV.
AC power (mains) input
Digital audio IN (optical)
Ethernet port
Join button
To Next Page
Loading...
Need help?
General
Weight and Dimensions
