46
Instruction for Use | HCA 56x and 8x8
9.1.3 Readout using the Radio Central Supercom 646 (Sontex 566)
The radio central Supercom 646 receives radio data from the Sontex 566 heat cost allocators or
from other SONTEX devices which are equipped with radio.
The data recorded in the concentrator can be read by different interfaces.
The remote readout interfaces for the SONTEX concentrator are:
Optical interface.
USB.
RS-232.
M-Bus.
3G / 4G
9.1.4 Readout using the Radio Central Supercom 647 (Sontex 868)
The radio central Wireless M-Bus Supercom 647 receives radio data from the Sontex 868 heat
cost allocators or from other Wireless M-Bus devices.
As the Sontex 868 radio heat cost allocator uses one-way radio technology, it must be used
with a Supercom 647 Wireless M-Bus and a PC (or touchscreen tablet) with the corresponding
software program
9.1.5 Readout using a Superlink C Gateway
The Superlink C gateway collects the radio data supplied by the Sontex 566 and Sontex 868
heat cost allocators or by other SONTEX or wM-Bus radio consumption meters. The data are
forwarded directly to the Sonexa WEB application. The reading data is then available and can
be forwarded to the various customer programs via APIs.
The readout interfaces used are:
NB-IoT, LTE-M (CAT-M)
USB.
9.1.6 Readout using a LoRaWAN®-Gateway
The LoRaWAN® gateway collects the radio data supplied by the Sontex 878 heat cost alloca-
tors. The data is then forwarded to the client application via the LoRaWAN® network.
The Sonexa WEB application can also be used to display this data
To Next Page
Loading...
