Getting started: Using the T68 as a modem
12
• To check CID in the phone, scroll to: Connect/Data comm./Data accounts. Open the account
you use for GPRS and check what CID is used for that account. If, for example, the CID is 3,
the dial string above should be
*99***3#. Click Next.
7.Check the name of the connection and click Finish.
8.Click Start, click Connect To, select the connection you just created and then click Properties.
9.On the General tab:
• Make sure the modem you want to use is selected under Connect using.
• In the Phone number box, the telephone number string you entered in step 6 above
should already be entered.
• Make sure the Use dialing rules check box is cleared.
10.On the Networking tab:
• In the Type of dial-up server I am calling from box, select PPP.
• Select Internet Protocol (TCP/IP)
• Client for Microsoft Networks should be cleared.
To Next Page
Loading...
