XBR-55/65A1E
ADJUSTMENT
MODEL NUMBER SETTING
1) In “Service Mode”, select “Model Information” by pressing “↑” or “↓” button then pressing “Enter” or “→” button to enter inside.
2) Select “Model Number Setting” by pressing “↑” or “↓” button then pressing “Enter” or “→” button.
3) Press “↑” or “↓” button to scroll Product Name Candidate. (e.g. XBR-55A1E UC2)
4) Select one Product Name from the list. After that select “[OK]” and press “Enter” button.
15
>>
>>
>>
>>
>>
>>
>>
[</>] Set [Home]Exit
General Setting
Tuner
Wi-Fi / BT
Service Mode
Model Information
Self diagnosis History
Video / Audio
Panel / PQ
>> SDB Service Menu
>>
Model Information
>>
Model Number Setting
>>
SERIAL NUMBER EDIT
[</>] Set [Home]Exit
Model
Status Information
OK
[MODEL_NUMBER_SETTING]
_ _ _ _ _ _ _ _ _ _ _ _
*This procedure is a must item. If you do not carry out this procedure , that may cause s software malfunction.
Also never forget to confirm the model name in system information in the UI once you finish this .(Refer P3)
To Next Page
Loading...
Need help?
General
