C:\d832100911\d832100911ILCE9AP2\01GB-ILCE9AP2\030BAS.indd
2019/02/19 16:35
ILCE-9
d-832-100-91(1)
GB
55
Shooting
Specifying the position where you want to focus in the
movie recording mode (spot focus)
The camera will focus on the touched subject.
Select a [Focus Area] other than [Flexible Spot] or
[Expand Flexible Spot].
MENU
(Camera Settings 1) [Center Lock-on AF]
[Off].
Touch the subject on which you want to focus before or
during recording.
• When you touch the subject, the focus mode temporarily switches to
manual focus and the focus can be adjusted using the focus ring.
• To cancel spot focus, touch
or press the center of the control
wheel.
Hint
• In addition to the touch focus function, touch operations such as the following
are also available.
– When [Focus Area] is set to [Flexible Spot] or [Expand Flexible Spot], the
focusing frame can be moved using touch operations.
– When the [Focus Mode] is set to [Manual Focus], the focus magnifier can be
used by double-tapping the monitor.
Note
• The touch focus function is not available in the following situations:
– When using the viewfinder
– When [Focus Mode] is set to [Manual Focus].
– When using the digital zoom
– When using the LA-EA2 or LA-EA4
– When using the LA-EA1 or LA-EA3, and the shooting mode is set to [Movie]
To Next Page
Loading...
