Why keying adjustments don't take effect on Sony Music Mixer?
If the keying adjustments aren't taking effect on your Sony Music Mixer, and you're using a keying source created with PowerPoint, make sure it's saved in BMP format. Tiff format can cause issues.
Why does camera preset disappear on Sony Music Mixer?
If the camera preset disappears on your Sony Music Mixer, and you're using a camera model EVI-D100/EVI-D100P, make sure the backup switch on the camera is set to ON before saving the preset.
Why no sound from speakers or headphones on Sony AWS-G500 (audio level meter doesn't move)?
If no sound is coming from the speakers or headphones and the audio level meter isn't moving on your Sony Music Mixer, here's what to check: * Make sure the connected device is powered on. * Verify the cables are properly connected. * Ensure the input signal is correctly assigned. * Confirm the CH ON button is illuminated. * Adjust the audio channel fader; it might be turned down. * Also, check the PGM fader to ensure it's not turned down. * Verify that the monitor target is set to PGM, which is displayed below the audio level meter.
Why NEXT button flashes and picture-in-picture doesn't apply on Sony AWS-G500?
If the NEXT selection button is flashing and the picture-in-picture effect isn't working on your Sony Music Mixer, it might be because you're trying to use the same image for picture-in-picture as the one being used for keying, or the image assigned to INT, or the same image being used for program output. Try selecting a different image.
How to solve video not appearing in PGM viewer on Sony Music Mixer?
If the video isn't appearing in the PGM viewer of your Sony Music Mixer, check if the FTB (Fade to Black) button is lit. If it is, turn it off.
How to solve DV signals not output on Sony AWS-G500 Music Mixer?
If DV signals are not being output from your Sony Music Mixer, first, ensure that the DV output settings are properly configured. Also, if the aspect ratio is set to 16:9 HD mode, try setting it to 4:3 or 16:9 SD mode.
Why do 4:3 materials display in wide screen on Sony Music Mixer?
If 4:3 video materials are displaying in wide screen on your Sony Music Mixer, and you're in 16:9 mode, switch the setting to 4:3 mode.
Why is there noise in video/audio on Sony AWS-G500 Music Mixer?
If you're seeing noise in the video or audio, or if there's no video or audio output at all from your Sony Music Mixer, it could be due to a poor signal connection. Try disconnecting and then reconnecting the cables. After doing so, restart both the connected DV device and the unit.
What to do if PGM does not switch on Sony AWS-G500?
If the PGM (Program) output isn't switching on your Sony Music Mixer and the [KEY] indicator on the operation screen is lit red, make sure the KEY button on the front panel is lit green. Then, press the CUT button.
How to fix compressed video in source viewer on Sony AWS-G500?
If the video in the source viewer of your Sony Music Mixer appears compressed, and you're in 4:3 mode, it might be squeezing 16:9 video. Try setting the mixer to 16:9 mode.
General| Video Inputs | HDMI, Composite |
|---|---|
| Audio Inputs | 2 x RCA |
| Video Outputs | HDMI, Composite |
| Audio Outputs | 2 x XLR |
| Frequency Response | 20 Hz to 20 kHz |
Details the principal features of the AWS-G500 Anycast Station Live Content Producer system.
Highlights the system's portability and integrated functions for live content generation.
Explains the system's capabilities for switching up to six input video signals with various effects.
Details how to remotely control VISCA-compatible cameras, including pan, tilt, and zoom.
Provides examples of how the AWS-G500 can be utilized in different scenarios.
Describes using the unit for seminars, events, and presentations with projectors or monitors.
Explains using the unit as a streaming server for small audiences over an intranet.
Identifies and describes the various buttons and connectors on the unit.
Details the controls and indicators located on the front panel of the unit.
Details the connectors and interface modules on the rear panel of the unit.
Details the connectors and buttons located on the side panel of the unit.
Explains the layout and elements of the unit's main operation screen.
Covers the initial setup procedures including unit installation and default settings.
Provides instructions on how to properly install the unit, considering ventilation and placement.
Explains how to select the signal format for output connectors like Composite, DV, and SDI.
Describes how to connect various external devices for input and output of video and audio signals.
Details the procedure for connecting cameras that support the VISCA protocol for remote control.
Explains how to connect an external hard disk for recording and file storage.
Provides instructions for connecting display devices like monitors and projectors to the unit.
Covers settings for handling video and audio signals input from connected devices.
Details how to assign video input signals to selection buttons and specify input connectors.
Covers settings for assigning audio input signals to channel faders and specifying input connectors.
Describes how to switch video signals and output the final program video, including applying video effects.
Explains the basic method of instantaneously switching videos without added effects.
Details how to gradually switch between videos using various transition effects.
Explains how to embed one video within another to create a picture-in-picture effect.
Describes how to add text or images to video for titles, logos, or subtitles.
Explains how to combine video by removing portions based on brightness (luminance).
Details combining video by removing portions based on color (chroma), typically for blue screen effects.
Describes how to preview and adjust effects like picture-in-picture and keying before program output.
Explains how to save and instantly recall video effect settings as snapshots.
Guides on using the Text Typing Tool software to create simple titles and graphics.
Covers saving, opening, renaming, exporting, and deleting title files created with the Text Typing Tool.
Details how to remotely control VISCA-compatible cameras connected to the unit.
Explains how to manually control camera functions like pan, tilt, zoom, and focus.
Describes how to save and recall camera settings as presets using numeric buttons.
Covers recording program output and input sources to an external hard disk via i.LINK connector.
Provides instructions on formatting an external hard disk for use with the unit.
Explains how to record input material and program output concurrently using the ON LINE button.
Details how to manage files stored on an external hard disk, including playing and organizing them.
Describes how to play back files recorded on the external hard disk.
Provides the procedure for safely disconnecting the external hard disk to prevent data corruption.
Covers recording program output to a VCR using DV, SDI, HD analog, and HD SDI connectors.
Explains how to operate the unit to record program outputs to a VCR via DV connectors.
Details how to control VCR playback operations directly from the unit.
Describes how to register a VCR for playback control via selection buttons.
Explains how to monitor audio signals using internal speakers or headphones.
Guides on selecting output destinations for audio signals routed to PGM, AUX, or MIX connectors.
Covers adjustments for video and audio input signals to optimize image and sound quality.
Details how to adjust luminance, chroma, hue, and auto gain for analog video inputs.
Explains how to adjust input signal levels for individual audio channels using input trim.
Describes how to limit peak audio components or compress sound for level differences.
Provides information on checking software versions and upgrading the unit's operating software.
Details the procedure for upgrading the unit's operating software and hardware firmware.
Lists and describes all available menu options and their default settings.
Details the structure and options available in the main top menu of the unit.
Details the structure and options available in the ACCESS menu for input adjustments.
Explains the structure and types of messages displayed by the unit for status and errors.
Provides a comprehensive list of all possible system messages with their meanings.
Offers solutions to common problems encountered during unit operation.
Lists common video issues and their possible causes and solutions.
Troubleshooting specific to external hard disk recognition and operation.
Provides technical specifications for the unit's hardware and interfaces.
Details the technical specifications for various video input and output signals supported by the unit.
Defines technical terms and concepts used throughout the manual.
To Next Page
