Sony BDP-S495 - [Easy Setup]; [Resetting]

33
Settings and Adjustments
x [Connection Server Settings]
Sets whether or not to display the
connected server.
x [Renderer Set-up]
[Automatic Access Permission]: Sets
whether or not to allow automatic access
from newly detected DLNA controller-
compatible product.
[Renderer Name]: Displays the player’s
name as it is listed on other DLNA
products on the network.
x [Renderer Access Control]
Displays a list of DLNA controller-
compatible products and sets whether or
not each product is accessible via this
player.
x [PARTY Auto Start]
[On]: Starts a PARTY or joins an
existing PARTY at the request of a
networked product compatible with the
PARTY STREAMING function.
[Off]: Turns off the function.
x [Media Remote Device
Registration]
Registers your “Media Remote” device.
x [Registered Media Remote
Devices]
Displays a list of your registered “Media
Remote” devices.
x [Remote Start]
[On]: Turns on or off the player using
your “Media Remote” when connecting
to the network.
[Off]: Turns off the functions.
b
This function does not work with the USB
Wireless LAN Adapter.
[Easy Setup]
x [Easy Initial Settings]
Select [Easy Initial Settings] to specify
the basic settings. Follow the on-screen
instructions.
x [Easy Network Settings]
Select [Easy Network Settings] to
specify the network settings. Follow the
on-screen instructions.
[Resetting]
x [Reset to Factory Default Settings]
You can reset the player settings to the
factory default by selecting the group of
settings. All the settings within the group
will be reset.
x [Initialize Personal Information]
You can erase your personal information
stored in the player.