[] 0-9 ENT Press 0-9 to select a channel; the channel changes after
a few seconds, or press ENT to change channels
immediately.
[] @ Use with 0-9 and ENT to select digital channels.
For example, to enter 2.1, press @, (_, C) and ENT.
[] VOL +/- Press to adjust the volume.
[] MUTING Press to mute the sound. Press again or press VOL + to
restore the sound.
[] POWER Press to turn on and off the TV.
[] INPUT Press to display the list of External Inputs and TV
mode. To toggle through the inputs, press i1"/,!,.
[] i1"/,!,/_./* Press t/!r,/_./, to move the on-screen cursor. Press @
@ to select/confirm an item.
[] TOOLS Press to display a list of convenient functions and menu
shortcuts. The TOOLS menu items vary based on
current input and content.
[] CH +/- Press to scan through channels. To scan quickly
through channels, press and hold down either +/-.
[] JUMP Press to jump back and forth between two channels.
The TV alternates between the current channel and the
last channel that was selected.
Guidelines to follow
14
• Point your remote control directly at the IR sensor located on
your TV.
• Make sure that no objects are blocking the path between the
remote control and the IR sensor on your TV.
• Fluorescent lamps can interfere with your remote control; try
turning off the fluorescent lamps.
• If you are having problems with the remote control, reinsert or
replace your batteries and make sure that they are correctly
inserted.
To Next Page
Loading...
Need help?
General