5
GB
Start-up Guide
2: Connecting an antenna/
cable/VCR
• Connecting cables are not supplied.
Connecting an antenna/cable
3: Preventing the TV from
toppling over (KLV-42EX410/
KLV-32EX310 only)
1 Install a wood screw (4 mm in diameter, not
supplied) in the TV stand.
2 Install a machine screw (M4 × 10, not
supplied) into the screw hole of the TV.
3 Tie the wood screw and the machine screw
with a strong cord (not supplied).
Connecting an antenna/cable and VCR
Antenna cable
Antenna cable
Antenna cable
AV cable
VCR
To Next Page
Loading...
