Sony CCP-8000 - Page 110

4-2
MVS-8000 System
SYSTEM SETUP
4-1. MVS-8000
Reference input and output
REF IN BNC type, 75 Z with loop-through output
HDTV systems :
HD tri-level sync/SDTV analog black burst/SDTV analog sync
SDTV systems :
Analog black burst/analog sync
REF OUT BNC type, 75 Z
HD tri-level sync (HDTV systems only)
Signal level 300 mV ±10 %
Analog sync
Signal level 300 mV ±10 %
Phase variation range
_90H to +90H
AC input
AC IN A, B, C, D 3-pin AC connector
Accessories supplied
75 Z terminator (1)
Bracket (4)
Support angle (2)
Screw (+B4 x10) (8)
Screw (+PSW4 x 10) (8)
Operation Manual (1)
Installation Manual (1)
Accessories not supplied
AC power cord (for USA and Canada only) (125 V 10 A 2.4 m (8 ft)) (Part No.: 1-557-377-11)
AC power cord (for Europe only) (250 V 10 A 2.4 m (8 ft)) (Part No.: 1-782-929-21)
MKS-8110HD 17 Input Board
General
Power requirements 12 V DC
Power consumption Max. 10 W
Dimensions 274 x 94 mm (10
7
/
8
x 3
3
/
4
inches) (w/d)
Mass Approx. 1 kg (2 lb 3 oz)
Input
Inputs 17 (BNC type)
Signal format SMPTE292M
Signal level 0.8 V p-p ±10 %
Signal transfer rate 1.5 Gbps
Return loss 15 dB
Cable length 100 m (FC-FB cable, BELDEN1694 or equivalent)
Accessories supplied
Operation and Installation Guide (1)
(supplied only when product is purchased separately)