4-1
MVS-8000 System
SYSTEM SETUP
Section 4
Specifications
The following specifications show the reference performance for this unit and individual option boards/
units.
Design and specifications are subject to change without notice.
4-1. MVS-8000
MVS-8000 Multi Format Switcher Processor
General
Power requirements 100 to 240 V AC ±10 %, 50/60 Hz
Peak inrush current (1) Power ON, current probe method : 60 A (100 V), 110 A (230 V)
(2) Hot switching inrush current, measured in accordance with European
standard EN55103-1 : 40 A (230 V)
Power consumption 20 to 8.5 A
Operating temperature +5 dC to +40 dC (41 dF to 104 dF)
Performance guaranteed temperature
+10 dC to +35 dC (50 dF to 95 dF)
Storage temperature _20 dC to +60 dC (_4 dF to +140 dF)
Operating humidity 10 % to 90 %
Dimensions 482 x 708 x 520 mm (19 x 27
7
/
8
x 20
1
/
2
inches)
(w/h/d, excluding projections)
Mass Approx. 85 kg (187 lb 6 oz)
(when equipped with all installable option boards and option power
supply unit)
Remote Control connectors
CTRL RJ-45
Complies with 100BASE-TX standard
DATA RJ-45
Complies with 100BASE-TX standard
REMOTE 1, 2, 3, 4 D-sub 9-pin, female
Comply with RS-422A standard
Data transfer rate : 38.4 Kbps
GPI D-sub 25-pin, female
TTL inputs : 8
Relay contact outputs : 4 (30 V AC/DC, 0.1 A)
Open collector outputs : 4
TERMINAL D-sub 9-pin, female
Complies with RS-232C standard
Data transfer rate : 9600 bps
EXT BNC type, 75 Z
S-BUS data transfer rate : 312/1250 Kbps
To Next Page
Loading...
