4-9
MVS-8000 System
SYSTEM SETUP
4-2. MVE-8000
MKS-8800 Multi Format DME Processor
General
Power requirements 100 to 240 V AC ±10 %, 50/60 Hz
Peak inrush current (1) Power ON, current probe method : 60 A (100 V), 60 A (230 V)
(2) Hot switching inrush current, measured in accordance with European
standard EN55103-1 : 40 A (230 V)
Power consumption Approx. 3.5 to 1.5 A
Performance temperature +5 dC to +40 dC (41 dF to 104 dF)
Operating temperature +10 dC to +35 dC (50 dF to 95 dF)
Storage temperature _20 dC to +60 dC (_4 dF to +140 dF)
Operating humidity 10 % to 90 %
Dimensions 440 x 221 x 520 mm (17
3
/
8
x 8
3
/
4
x 20
1
/
2
inches)
(w/h/d, excluding projections)
Mass Approx. 20 kg (44 lb 1 oz)
(when equipped with all installable option boards)
Reference input
REF IN BNC type, 75 Z with loop-through output
HDTV systems :
HD tri-level sync/SDTV analog black burst/SDTV analog sync
SDTV systems :
Analog black burst/analog sync
Control connectors
CTRL RJ-45
Complies with 100 BASE-TX standard
DATA RJ-45
Complies with 100 BASE-TX standard
EDITOR D-sub 9-pin, female
Complies with RS-422A standard
Data transfer rate : 38.4 Kbps
GPI D-sub 25-pin, female
TTL inputs : 8
Relay contact outputs : 4 (30 V AC/DC, 0.1 A)
Open collector outputs : 4
AC input
AC IN 3-pin AC connector
System Delay
System delay 1 frame (except 720P)
2 frames (in case of 720P)
Accessories supplied
MDR 68-pin cable (2)
75 Z terminator (1)
Operation Manual (1)
Installation Manual (1)
Accessories not supplied
AC power cord (for USA and Canada only) (125 V 10 A 2.4 m (8 ft)) (Part No.: 1-557-377-11)
AC power cord (for Europe only) (250 V 10 A 2.4 m (8 ft)) (Part No.: 1-782-929-21)
4-2. MVE-8000
To Next Page
Loading...
